Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 108 / 132

1.9) Option Programming by Keypad
To set the main control panel options using a keypad,
complete the following steps.
1. Access the Installer menu, as indicated in the para-
graph “Access to the operations”.
INSTALLER
1act. 2prg 3view
2. Select the Action option by pressing 1 .
INSTALLER 1.1
ZONE test
3. Select Panel Prog.
INSTALLER 1.9
Panel Prog.
4. Press ENTER .
Panel Prog.
Zones Zn---
5. Select the Option Group you want set up by press-
ing
a and b then press ENTER and refer to the rela-
tive paragraph.
+
The Installer Menu Timeout is suspended during
the Option Programming. The keypad exits from
the Installer Menu when you press
ESC after the
Installer Menu Timeout has expired.
n
Zones
Panel Prog.
Zones Zn---
The Zone option let you to set up the Zone Partitions as
follow.
1. Enter the Identification Number of the Zone you
want set up.
Zone 001
Zones Zn001
2. Press ENTER .
Zones Zn001
Part mask
3. Press ENTER again: the characters on the display
bottom line show the Partitions of the selected
zone: the 1st is for Partition 1, the 2nd is for Partition
2 and so on, as follow.
Ø
* : the Zone is assigned to the Partition.
Ø
- : the Zone is NOT assigned to the Partition.
Part mask Zn001
*---------------
4. Set up the Zone Partitions as follow.
Ø
Press a to assign ALL the Partitions to the Zone.
Ø
Press b to assign none Partition to the zone.
Ø
Press c and d to scroll the Partitions: a blinking char-
acter indicates the currently selected Partition.
Ø
Press ON to assign the selected Partition to the
Zone.
Ø
Press OFF to NOT assign the selected Partition to
the Zone.
Ø
Press ENTER to confirm the Zone Partitions or ESC
to discharge the changes, and go back to step 1 .
Part mask Zn001
*--------------*
In the top example, Zone 1 is assigned to the Partitions
1 and 16.
n
Partition
Panel Prog.
Partition Pt---
The Partition option let you to set up the Entry and Exit
Times for the Partitions, as follow.Enter the Identifica-
tion Number of the Zone you want set up.
1. Enter the Identification Number of the Partition you
want set up.
Partition 01
Partition Pt001
2. Press ENTER .
Partition Pt001
Entry time
3. Press a and b to scroll the Entry time and Exit
time , then press ENTER to select the displayed op-
tion: the display bottom line shows the current value
on the left, and the valid range on the right.
Entry time Pt001
30s : 15/3600
4. Enter the required value.
Ø
You must enter a 4-digit value: e.g. you must press 0,
0, 6 and 0 to enter 60 seconds.
Ø
Press ESC to delete the value.
Ø
Press ESC again to to discharge the changes and go
back to step 3 .
Ø
Press ENTER to confirm the value and go back to
step 3 .
108 Expandable Hybrid Control Panel