Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 53 / 132

Partitions
Each Partition consists of a group of zones that the
Control Panel manages independently (Virtual Control
Panel). Each Partition can be programmed with its own
Codes, Timers, Actions and Parameters.
This Control Panel manages 16 Partitions. You can
setup the Partitions in the
Zones group.
The Partitions group allows you to set up the options
for the zones, as described below.
The first column shows the Partition Identification Num-
ber.
Label This option is for the Partition Label (16 charac-
ters). The Partition Label will identify the Partition in all
the operations it is involved in.
SMS Label Enter a code to identify the Partition in the
operations via SMS (see “USER MANUAL > SMS
OPERATIONS”).
Valid values: up to 5 characters.
Default: the identification number of the Area.
Time-Entry Delay Any partition can have an Entry
Delay , during which the Entry Path and the Entry De-
lay zones are not able to alarm the partition. This time
starts when the partition is armed in Stay or Away
mode, and an
Entry Delay zone is violated.
The Partition Entry Delay will be signalled by:
Ø
the Entry Delay on partition event for the partition
Ø
an audible signal from the partition keypads
Ø
activation of partition’s wireless sirens (sound and
flash) if the option
Wireless Module > Wireless Si-
rens > Exit Entry Beeps is enabled
The duration of the timer should be programmed to
have enough time to reach the point in which the parti-
tion can be disarmed.
Ø
The valid range is 15 to 3600 seconds
Ø
The default setting is 30 seconds.
Time-Exit Delay Any partition can have an Exit Delay ,
during which the Exit Delay zones are not able to alarm
the system. This time starts when the partition is armed
in Stay or Away mode. At the end of the
Exit Delay the
Exit Delay zones becomes Instant zones.
The Partition Exit Delay will be signalled by:
Ø
the Exit Delay on partition event for the respective
partition
Ø
an audible signal on the partition keypads
Ø
activation of partition’s wireless sirens (sound and
flash) if the option
Wireless Module > Wireless Si-
rens > Exit Entry Beeps is enabled
Ø
The valid range is 15 to 3600 seconds;
Ø
The default setting is 30 seconds.
Time-Last Exit Violation of an Armed Last Exit Zone
will trigger the programmed Last Exit Time of its Parti-
tion. This feature will allow the system to Arm as soon
as the programmed
Last Exit Time expires.
Ø
Valid entries: 5 through 3600 s, in 1-s steps.
Ø
If you enter a higher value, it will be converted auto-
matically to the maximum admissible value.
Ø
Default setting: 15 seconds.
Time-Negligence Under normal circumstances, Us-
ers Arm their systems with a certain regularity, if this
does not occur, it may be due to Negligence on the
User’s behalf or may mean that the User is in difficulty
(due to serious illness, accident or delinquency), in
which case, this feature will prompt the Central station
operator to take the necessary action.
This option will allow you to set the
Negligence Time . If
the system is not Armed within the programmed time,
the Control Panel will generate the
Negligence on Par-
tition event.
Ø
Valid entries: 0 through 40 days in 1-day steps.
Ø
If this option is left at default (0), Negligence will not
be signalled.
Negligence will be signalled by:
Ø
the Event negligence on partition event — relevant
to the Partitions the Zone is assigned to.
Time-Inactivity This option allows the system to moni-
tor alarm zone inactivity (non-detection of motion),
when the partition is disarmed. The
inactivity function
provides protection against the detector blinding and al-
lows the system to detect zone malfunction. Under nor-
mal circumstances, users disarm the system when they
are on the premises, therefore, the zones should detect
motion (violation) quite frequently. If this does not occur,
the system will suppose that the user is unable to move
(due to serious illness, accident or delinquency) and as
a result will generate a
Delinquency on Partition
event, thus prompting the central station operator to
take the necessary action.
Ø
Valid entries are 0 through 240 hours (10 days)
1-hour steps.
Ø
Zero meas that zone inactivity will not be signalled.
Ø
The default setting is zero.
Zone inactivity will be signalled by:
Ø
the event Delinquency on partition — relating to
the partitions the zone is assigned to.
Ø
ON status of the
a
indicator on keypads;
Ø
the tamper Delinquency on keypads, in View Sig-
nals mode.
The following information will be recorded in the event
log.
Ø
EVENT: Delinquency
Ø
WHO: label of the zone that triggered the inactivity
event.
Ø
PARTIT.: list of the partitions the zone is assigned to.
Zone inactivity will end when:
Ø
the zone restores standby;
Ø
the zone triggers an alarm;
Ø
ALL the partitions the zone belongs to disarm.
The end of a zone inactivity event will be signalled on
the
a
LED (OFF) on keypads which are enabled on at
least one of the partitions the zone belongs to.
ABSOLUTA Plus PROGRAMMING FROM THE PC 53