Goodrive3000 series medium voltage VFD
HMI
-17-
4 HMI
4.1 Keypad display
The LCD keypad is a standard configuration for Goodrive3000 series VFD. The following figures show the keypad
appearances.
State LED
Entry key
Right-shift key
Stop/Reset key
UP key/
DOWN key
Programming key
Quick key
Run key
Figure 4-1 Keypad
4.1.1 Function of keys
Table 4-1 Function of keys
Key
Name
Function
Programming
key
Press it to enter or exit level-1 menus or delete a parameter.
Confirmation key
Press it to enter menus in cascading mode or confirm the setting of a
parameter.
UP key
Press it to increase data or move upward.
Down key
Press it to decrease data or move downward.
Shifting key
Press it to select display parameters in the interface for the VFD in
stopped or running state or to select digits to change during parameter
setting.
Run key
Press it to run the VFD when using the keypad for control.
Stop/Reset key
When the VFD is in running state, this key is used to stop the VFD and the
function of this key is restricted by P07.04. When the VFD is in faulty state,
this key can be used to reset faults and it is not restricted by P07.04.
Multifunction
shortcut key
The function is determined by P07.03.
0: Jogging (only apply to keypad control)
1: Switch between forward and reverse rotations (only apply to keypad
control)
