IEI Technology KINO-945GSE3 Скачать руководство пользователя страница 95

Страница: 95 / 178

KINO-945GSE3 User Manual

Page 81

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

5.3.3 Super IO Configuration

Use the

Super IO Configuration

menu (

BIOS Menu 6

) to set or change the

configurations for the FDD controllers, parallel ports and serial ports.

Содержание KINO-945GSE3



















































































































































































Результаты поиска

Содержание KINO-945GSE3

Отзывы:

IEI Technology KINO-945GSE3, Руководство пользователя, Страница: 95 / 178

Результаты поиска

Содержание KINO-945GSE3

Отзывы: