IBM PC Server 520, Руководство пользователя

Страница: 329 / 438

Testing the System
The Main Menu of the System Board Diagnostic Diskette
The Main Menu is the starting point for all of the diagnostic tests.
It contains the following choices:
Ÿ Diagnostics : When you select this choice from the Main Menu,
the Diagnostics Menu appears. The Diagnostics Menu contains
the following selections:
– Quick Check automatically checks the hardware
configuration and builds a group of tests based on the
configuration check. The diagnostic program then runs the
tests for each of the devices or modules found during the
configuration check. Upon completion of the Quick Check,
you are prompted to:
Press any key to continue .
Pressing any key at that point brings you back to the
Diagnostics Menu.
– Module Tests allow you to more rigorously test an
individual module (or device such as a diskette drive) or
specify a group of tests for several modules. In addition,
you can specify how many times to run an individual test
and how the test program should note and log any errors it
finds. See “Using the Module Tests” on page 321 for more
information about running the module tests.
– Options allow you to set or change defaults that affect the
reporting, error logging, and presentation of the error
information. For more information about the options
available, see “Test Options” on page 323.
Ÿ
System Info : When you select this choice from the Main Menu,
the System Info Menu appears. The System Info Menu allows
you to view the server's hardware and software configuration
information. For example, you can view the IRQ and DMA
assignments memory usage, address and attribute information
for device drivers, and so on.
Ÿ Reports : When you select this choice from the Main Menu, the
Reports Menu appears. The Reports Menu allows you to print
the system information.
Ÿ
Utilities : When you select this choice from the Main Menu, the
Utilities Menu appears. The Utilities Menu provides access to
Chapter 7. Solving Problems
313