IBM PC Server 520, Руководство пользователя

Страница: 57 / 438

Installing PeerMaster LAN Software
port. You can, however, override the factory-provided MAC
address using the NODE keyword.
Each time you issue the load command, Novell NetWare creates a
unique instance of the LAN driver. You can use the NAME
keyword to bind a unique name to each instance of the driver. You
can use this unique driver name when binding a specific instance of
the driver to a network protocol. The following example illustrates
the use of the NAME keyword.
:LOAD D:\[PATH]MXMCA4BT.LAN SLOT=21 NAME=SLOT21
:LOAD D:\[PATH]MXMCA4BT.LAN SLOT=22 NAME=SLOT22
:LOAD D:\[PATH]MXMCA4BT.LAN SLOT=23 NAME=SLOT23
:LOAD D:\[PATH]MXMCA4BT.LAN SLOT=24 NAME=SLOT24
(where D: is the drive and PATH is the directory.)
These commands cause Novell NetWare to load one instance of the
LAN driver for each LAN port of the adapter physically installed in
expansion slot 2. The NAME keyword associates each driver
instance with a unique name, such as slot21, slot22, and so forth.
In this mode, you must bind each driver instance to a network
protocol using a unique network number. The unique driver names
established using the NAME keyword bind each driver instance to a
protocol. The following example illustrates the bind process.
:BIND IPX SLOT21 NET=21
:BIND IPX SLOT22 NET=22
:BIND IPX SLOT23 NET=23
:BIND IPX SLOT24 NET=24
When issuing the load command, use of the NAME keyword is
optional. Alternatively, you can specify the actual driver name
(MXMCA4BT.LAN) in the bind command. The bind command
presents you with the list of driver instances to choose from if a
specific instance is not specified. Unique driver names enable the
bind process to occur without manual intervention. In this manner,
you can automate the process using the AUTOEXEC.NCF file.
The process for loading multiple PeerMaster adapters is identical to
the process for loading a single adapter. Load successive adapters
Chapter 2. Installing Your Software
41