IBM PC Server 520, Руководство пользователя

Страница: 357 / 438

ServeRAID Adapter Messages
New Adapter Installed in a Configured Server
When the ServeRAID adapter detects that the identifiers of the
drives do not match the adapter configuration information, the
following message appears:
host id: old ch: old bay: new ch:new bay
where host ID is the adapter identification, old channel is the channel
that matches the drive configuration information, and old bay is the
bay that matches the drive configuration information. New ch is the
channel where the drive is now located, and new bay is the bay
where the drive is now located.
For example:
(My Machine : 1:6
>
2:1ð)
In this example, the message indicates that the drive from Channel
1, Bay 6 is now located at Channel 2, Bay 10. The drive might have
been physically moved to the new bay.
Two choices will follow this message:
F4 Retry. Select this key after correcting the problem. For
example, select retry after you move the hard disk drive
to its previously assigned location, or after you install the
original ServeRAID adapter.
F7 Select this key to import the configuration information
from the drive and to update the configuration
information on the ServeRAID adapter. This choice is
useful when you replace the ServeRAID adapter in an
existing disk-array model.
You also might select F7 if you replace a whole set of
drives with drives that were configured in another server
with a ServeRAID adapter.
Note: When you install drives in a server that has no
logical drives defined, the F7 choice will not
appear. This can occur when you replace the
ServeRAID adapter itself. The adapter does not
contain any logical drives in its factory
configuration. Therefore, F7 will not appear. In
Chapter 7. Solving Problems
341