IBM PC Server 520, Руководство пользователя

Страница: 181 / 438

Reference and Diagnostic Diskettes
When you finish making changes:
1. Press F3 to exit without saving the changes.
2. Press Enter to save the changes. You are prompted to restart
the computer so that the changes will take effect.
You can get online help for each task by pressing F1.
Starting the operating system
To start the operating system:
1. Select Start operating system from the Main Menu, and then
follow the instructions on the screen.
2. When prompted, remove the Reference Diskette; then press
Enter to restart the computer from a diskette or hard disk drive.
The server restarts.
Backing Up System Diskettes
Select Backup of system diskettes from the Main Menu to backup
the System Diskettes or to restore the configuration information
from the System Diskettes. This is useful in case the battery fails or
a change that you made to the configuration information causes a
problem and you need to change it back to its previous setting.
Note: Store the original system diskettes in a safe place. Always
use the backup copies when configuring and troubleshooting
your server.
The system prompts you to switch the diskettes and label the
diskette.
Note: You will need to have a formatted diskette for each system
diskette that you copy.
Chapter 5. Configuring Your Server
165