IBM PC Server 520, Руководство пользователя

Страница: 211 / 438

Removing Memory-Module Kits
5. If you are not installing memory-module kits in the empty
connectors, go to Table 5 on page 385 to update the memory
information; then go to step 7.
6. If you are installing memory-module kits in the empty
connectors, go to step 3 on page 189.
7. Replace the memory riser card in the connector.
a. Hold the memory riser card at an angle just over the pegs
on the support bracket; then slide the memory riser card
into the connector.
b. Gently press the memory riser card onto the pegs.
c. Press the clasps over the edge of the memory riser card.
Chapter 6. Installing Options
195