IBM PC Server 520, Руководство пользователя

Страница: 286 / 438

Replacing the Battery
3. Remove the battery:
a. Use one finger to lift the battery clip over the battery.
b. Use one finger to slightly slide the battery toward the front
of the server. (The spring mechanism behind the battery
will push it out toward you as you slide it forward.)
c. Use your thumb and index finger to pull the battery from
under the battery clip.
4. Insert the new battery:
a. Tilt the battery so that you can insert it into the front of the
socket, under the battery clip.
b. As you slide it under the battery clip, press the battery
down into the socket.
5. Replace the memory riser card:
a. Hold the memory riser card at an angle just over the pegs
on the support brackets; then slide the memory riser card
into the connector.
b. Gently press the memory riser card onto the pegs.
c. Press the clasps over the edge of the memory riser card.
6. Reinstall the server covers and complete the installation (see
“Completing the Installation” on page 289).
7. Start the Configuration/Setup utility program and reset
configuration parameters as needed.
Ÿ To reset the system date and time, go to “Date and Time”
on page 155.
Ÿ
To reset the power-on password, go to “Setting a Power-on
Password” on page 159.
Ÿ
To reconfigure your system, follow the instructions given in
“Using the System Diskettes” on page 164 (all models).
270
PC Server 520 User's Handbook for PCI/Micro Channel