IBM PC Server 520, Руководство пользователя

Страница: 344 / 438

Error Messages
POST Message Description
161 The real-time clock battery has failed.
CAUTION:
The lithium battery (IBM part number 33F8354) presents a
fire, explosion, or severe burn risk. Do not recharge it,
disassemble it, heat it, incinerate it, or expose its cell
contents to water. Dispose of the battery as required by
local ordinances or regulations.
Action: Call for service, or replace the battery yourself (see
“Replacing the Battery” on page 268 for assistance).
162 POST found a configuration data error.
Action: Turn off the system and make sure all attached
devices are turned on; then turn on the system.
Ÿ If you have changed the configuration (for example,
added or removed an option), enter Configuration/Setup
to clear the configuration errors.
Ÿ If you have not changed the configuration, start the
system programs and run the Test the Computer program
to determine the cause of the problem and the action to
take.
163 Time of day has not been set.
Action: Start the Configuration/Setup utility program; then
select Date and time to set the correct date and time. Until
the system is serviced, it can be used, but any application
programs that use the date and time will be affected.
164 A change in the memory configuration occurred. Installing
memory, incorrectly installing memory, or removing memory
can cause this problem. It also can occur if a defective
memory module is disabled.
Note: The system can be used with decreased memory
capacity.
Action:
Ÿ If you have just installed memory, see “Installing
Memory-Module Kits” on page 186 to verify that the new
memory is correct for your system. Then start the system
programs and run the Test the Computer program to
identify the location of the problem memory module.
Ÿ
If you have not just installed memory, have the system
serviced.
328
PC Server 520 User's Handbook for PCI/Micro Channel