IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 160 / 197

‡ —
svc>tftp
-------BankA-------+---------- Description -------+------ Date -------+
IMAGE - PENDING 10 Feb 1998 17:46
CONFIG 1 - AVAIL 10 Feb 1998 17:46
CONFIG 2 - AVAIL 09 Jan 1998 10:40
CONFIG 3 - AVAIL 06 Jan 1998 15:46
CONFIG 4 - PENDING * 02 Jan 1998 11:51
+------ BankB -------+--------- Description ----------+------ Date -------+
IMAGE - AVAIL 03 Feb 1998 14:42
CONFIG 1 - AVAIL * 03 Feb 1998 14:43
CONFIG 2 - AVAIL 22 Jan 1998 13:43
CONFIG 3 - AVAIL 06 Jan 1998 17:25
CONFIG 4 - AVAIL 26 Jun 1998 09:48
+------------------------+--------------------------------+----
Load or Config?
Specify the server IP Address:
1.1.1.4
Specify the remote directory: /u/2212/swload
Enter destination bank : b
tftping load modules... please be patient.
ˆ ˜
5. Type set and press Enter to cause the bank and config file that you just transferred the code load or
configuration data into to become active at the next reboot. You will be prompted for the destination
source bank and configuration file. Until you reload the IBM 2212, the state of the bank is pending.
6. Type reboot and press Enter.
Transferring Files Using Zmodem
Question How do I use Zmodem to transfer operational code and configuration files onto the IBM 2212?
Answer
Access the SVC> prompt. From the SVC> prompt, type zmodem and press Enter. You will be
prompted to specify the bank for the image files or the bank and the config number for the
configuration files that you transfer. The interface for transferring is designed so that you
cannot overwrite any ACTIVE file.
For transfers via modem, each load module must be separately named and transferred
individually.
Note: When using Zmodem to transfer a multiple load module image (several files ending in
.ld), you must transfer each of the modules one by one to get the entire load module
image.
When an entire load image has transferred, the status of the bank will change from
CORRUPT to AVAIL. Transfer file LML.ld first. Unless you see an information message
ERROR WRITING FILE
appear, assume each individual transfer has been successful.
E-22
2212 Service and Maintenance