IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 141 / 197

Accessing OPCON from SVC>
Question How do I access the OPCON command line interface from within the service recovery function
( SVC> )?
Answer From the
SVC>
prompt, type Bootmode, then select 3. Normal Boot From Disk and press
Enter. Next, type reboot and press Enter. The OPCON prompt * is displayed after the system
boots.
Navigating Through the OPCON Command Line Interface
Question How do I use the commands in the Command Line Interface?
Answer The structure of the interface is shown in Figure E-1.
The Access Integration Services Software User’s Guide describes the entire command line
interface. The basic prompts that you use are the:
¹
*
prompt, which is the OPerating CONsole (OPCON) prompt, the initial entry point to the
command line interface
¹
Config
>
prompt, which is used for configuration changes
¹
+
prompt, which is known as monitoring or GWCON.
¹
Config Only
>
prompt, which is used for initial configuration. The IBM 2212 boots to this
prompt if it has not been configured. You cannot access GWCON ( + ) from the Config
Only>
prompt.
The basic commands are:
¹
Type ? and press Enter at any time to view a list of possible commands.
¹
Type exit and press Enter to return to the
+
prompt and to the
Config
>
prompt.
¹
Press the Ctrl-p keys to return to the
*
prompt.
┌─────┐
First ┌───────────────────5│OPCON│%───────────────────┐
Level │ │ * │ │
│ └┬───┬┘ │
│ ┌──────────┘ & └─────────┐ │
│ Talk 5 │ Talk 6 │
│ │ │ │ │
│ │ │ │ │
│ │ │ │ │
│ 6 │ 6 │
│ ┌───────┐ │ ┌───────┐ │
Second │ │GWCON │ ctrl-p │CONFIG │ │
Level │ │process├───────┴───────┤process│ │
│ └──┬────┘ └────┬──┘ │
│ │ & & │ │
│ Prot 0 │ │ Prot 0 │
│ │ │ │ │ │
│ │ │ │ │ │
│ │ │ │ │ │
│ │ │ │ │ │
ctrl-p 6 │ │ 6 ctrl-p
Third │ ┌─────┐│ │┌──────────┐ │
Level └───────┤IP> │Exit Exit│IP Config>├──┘
└─────┘ └──────────┘
Figure E-1. Structure of the Command Line Interface with the protocol command (Prot) as an example
Appendix E. Common Tasks
E-3