IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 156 / 197

From the
SVC>
prompt:
1. Access the
SVC>
prompt. (See “Accessing the Service Recovery Prompt (SVC>)” on
page E-4).
2. At the
SVC
>
prompt and press Enter, type copy. You will be prompted for the rest of the
information, as shown in the following example.
‡ —
svc>copy
BankA ---+--------- Description ----------+------ Date -------+
IMAGE - PENDING 10 Feb 1998 17:46
CONFIG 1 - AVAIL 10 Feb 1998 17:46
CONFIG 2 - AVAIL 09 Jan 1998 10:40
CONFIG 3 - AVAIL 06 Jan 1998 15:46
CONFIG 4 - PENDING * 02 Jan 1998 11:51
+------ BankB -----------+--Description ----------+------ Date -------+
IMAGE - AVAIL 14 Feb 1998 15:38
CONFIG 1 - AVAIL * 03 Feb 1998 14:43
CONFIG 2 - AVAIL 22 Jan 1998 13:43
CONFIG 3 - AVAIL 06 Jan 1998 17:25
CONFIG 4 - AVAIL 26 Jun 1998 09:48
Load or Config? c
Enter source bank : a
Enter source config <1-4>: 3
Enter destination bank : b
Enter destination config <1-4>: 3
/hd0/sys0/CONFIG2 --> /hd0/sys1/CONFIG2
Copy configuration commmand successful!
ˆ ˜
If you copy an image, the same rules apply except that image files can be copied only from
bank to bank. These steps describe how the copy of an image affects the image that was
previously in the bank:
1. The copy overwrites the image that was previously in the bank.
2. The copy acquires the status of the image that was previously in the bank.
Erasing Files
Question How do I erase the contents of a bank in the IBM 2212?
Answer
To erase a file, at the
Boot config
>
prompt or the
SVC>
prompt, type erase and press Enter,
and then follow the prompts.
If you select a file to erase with a status of CORRUPT or NONE, the erase option is
discontinued.
Note that the following rules apply to erasing files from the IBM 2212:
¹
Image files that are not ACTIVE can be erased anytime
¹
ACTIVE image files cannot be erased
¹
ACTIVE configuration files cannot be erased
E-18
2212 Service and Maintenance