IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 109 / 197

Testing the Adapters
|
‡
|
—
|
Screen 1 of 1
|
Device Status and Control
|
10/100 Mb Ethernet PMC Adapter, Slot 5, Net # 0
|
Operational Status Diagnostic Status Fault Status Network Connection
|
DIAGNOSTICS TESTING OK UNKNOWN
|
0%
|
Select from the following:
|
Disable Device
|
Enable Device
|
Run test one time
|
Loop test until an error occurs
|
Loop test until manually stopped - log all errors
|
Stop looping test
|
< 1. View Test History Log >
|
< 2. View Hardware Error Log >
|
Select (1-2 or B=Back R=Refresh status H=Help ):
|
Figure 6-8. Device Status and Control Menu, Version 2.0
9. Wait until a message similar to the following is displayed: Diagnostic Test for
10/100 Mb Ethernet PMC Adapter has status available.
Then reconnect the
network cable to the adapter. Select r to refresh and view the results of the
test. In this example, the system reports test completion with no errors. If the
test fails, you will receive a message directing further action.
‡ —
Screen 1 of 1
Test Results
10/100 Mb Ethernet PMC Adapter, Slot 5, Net # 0
Operational Status Diagnostic Status Fault Status Network Connection
DISABLED INACTIVE OK UNKNOWN
The Test Completed with No Errors.
10. Select b to return to the Device Status and Control Menu.
Chapter 6. Using Diagnostics
6-11