IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 23 / 197

| 018 (continued)
| a. Replace the hard file or compact flash. (See “Installing a Hard Drive
| Upgrade Feature in a Model 1xx Chassis” on page 2-28, or “Installing a
| Hard Drive Upgrade Feature in a Model 4xx Chassis” on page 2-36, or
| “Exchanging a Compact Flash Feature” on page 2-22.)
| b. Restart the verification procedure.
| c. Look up the error code in Chapter 5, “Bootstrap Error Codes” on
| page 5-1.
| 4. If error code 05000101 has not been logged, from the
SVC>
prompt, TFTP
| new operational code onto the IBM 2212. (See “Updating the Operational
| Code” on page E-23.)
After three minutes, the green system card status LED should be on and the
yellow LED should be off. Does this correct the problem?
Yes No
019
| – Replace the hard drive or compact flash. If you have a
| high-performance system card and the Hard Drive 1 status LED is lit
| replace the compact flash. If you have a high-performance system
| card and the Hard Drive 2 status LED is lit replace the hard drive. See
| “Exchanging a Compact Flash Feature” on page 2-22, or “Installing a Hard
| Drive Upgrade Feature in a Model 1xx Chassis” on page 2-28, or
| “Installing a Hard Drive Upgrade Feature in a Model 4xx Chassis” on
| page 2-36. Restart the verification procedure. See Step 001 on page 1-9.
020
1. Access the
SVC>
prompt. (See “Accessing the Service Recovery Prompt
(SVC>)” on page E-4.) Then, type writeos and press Enter to write the new
operational code to the system card flash. Enter the software bank (A,B) to
load from and press Enter.
2. Type writeboot and press Enter to write the new bootstrap code to the system
card flash. Enter the software bank (A, B) to load from and press Enter.
Restart the verification procedure. See Step 001 on page 1-9.
Chapter 1. Problem Determination
1-15