IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 105 / 197

| While all of the menu choices are displayed for each device, only those that
| are appropriate for the current state of the device will be active for
| selection.
| Enable Device
| The device will be enabled for normal operation. This performs the
| same function as the enable or test commands available at the
| router’s monitoring (talk 5) prompt (+).
| Disable Device
| The device is taken out of its normal operational state. If this menu
| option is available, then the device must be disabled before any
| diagnostic test can be started. This performs the same function as
| the disable command available at the router’s monitoring (talk 5)
| console.
| Run Default Test
| This starts a test which assumes that the device is set up for
| normal operation. For communication adapters this means that it
| has a cable attached and is connected to the network.
| Run Interactive Test
| This starts a test which will present an additional menu of options
| such as cable attachment and wrap plugs can be specified.
| Run test one time
| This starts a test which will present an additional menu of options
| such as cable attachment and wrap plugs can be specified.
| Stop Looping Test
| Stops a looping test. Depending on the length of each test loop,
| this could take up to a minute.
| Loop Test - stop on first error
| This starts a looping test that will stop when the first error is
| detected. A menu of additional test options may be presented
| before the loop is started.
| Loop test until an error occurs
| This starts a looping test that will stop when the first error is
| detected. A menu of additional test options may be presented
| before the loop is started.
| Loop Test - Log all errors
| This starts a looping test that will loop until a "Stop Test" request is
| made. All detected errors are logged. A menu of additional test
| options may be presented before the loop is started.
| Loop test until manually stopped - log all errors
| This starts a looping test that will loop until a "Stop Test" request is
| made. All detected errors are logged. A menu of additional test
| options may be presented before the loop is started.
| View Test History Log
| Displays a history of recent diagnostic tests that have been
| executed.
| View Hardware Error Log
| Displays a list of errors detected by diagnostic tests.
Chapter 6. Using Diagnostics
6-7