IBM Cloud Object Storage System Slicestor 2212..., Руководство по обслуживанию и ремонту

Страница: 142 / 197

Accessing the Service Recovery Prompt (SVC>)
Question How do I access the
SVC>
prompt?
Answer There are two ways depending on whether the IBM 2212 is operating normally, or in recovery
mode.
¹
In normal operational mode, to access the SVC> prompt:
1. Either unplug and plug the power cord on the IBM 2212, or type reload at the OPCON
(*) prompt.
2. Press and hold the space bar when you see the message
Please press the space
bar to obtain the console
. The console will display the following message:
‡ —
Please press the space bar to obtain the console.
Console granted to this interface
Space bar was pressed during IPL.
Do you wish to enter the service menu?(Y/N)
(in 10 seconds, N will be defaulted)
Service Console
svc>
ˆ ˜
3. Press y within 10 seconds.
To display a list of available commands, type ? at the
SVC>
prompt.
¹
From the Bootstrap Menus (your IBM 2212 is in recovery mode), to access the SVC>
prompt:
1. Select Issue Reset.
2. Press and hold the space bar when you see the message
Please press the space
bar to obtain the console
. The console will display the following message:
‡ —
Please press the space bar to obtain the console.
Console granted to this interface
Space bar was pressed during IPL.
Do you wish to enter the service menu?(Y/N)
(in 10 seconds, N will be defaulted)
Service Console
svc>
ˆ ˜
3. Press y within 10 seconds.
To display a list of available commands, type ? at the
SVC>
prompt.
E-4
2212 Service and Maintenance