Index
Index-24
HP Servers Troubleshooting Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: x-index.doc
Codename: Generic TSG Part Number: 161759-007 Last Saved On: 11/19/02 9:55 AM
RIS copies between drives do
not match
RJ-45 receptacle, warning 2-2
ROM
accessing latest A-2
disaster recovery 5-2
possible failures 3-10
POST error messages C-4, C-6, C-7,
redundant image recovery 5-4
redundant, corrupted C-9
redundant, POST error messages C-9
remote flash problems 3-10, 3-11
remote flash, network connectivity
required 3-10
remote flash, procedures 3-10
remote flash, requirements 3-9
version, determining 1-16
ROM error
ROM-Based Setup Utility
See
RBSU
ROMPaq
accessing A-4
described A-4
disaster recovery 5-2
website 3-11
run system configuration
utility - F10 key
S
S.M.A.R.T. hard drive detects
imminent failure
safety information 2-2
SCO OpenServer
See
Caldera and SCO
operating systems
SCO UnixWare
See
Caldera and SCO
operating systems
screen, blank 2-35, 2-36
screwdriver symbol 2-2
SCSI bus
cabling error D-17, D-19
door alert D-17
fan errors D-18, D-19
firmware, unsupported D-18
overheating D-18
power supply failure D-17
SCSI cable error detected
SCSI cable, POST error messages C-44,
SCSI controller failure
SCSI controller test
failed
SCSI controller, POST error messages C-47
SCSI devices
See also
devices
ID settings 2-26
POST error messages C-5
problems 2-26
SCSI disk erase tape test
failed
SCSI disk ID drive types test
failed
SCSI disk random read test
failed
SCSI disk read test
failed
SCSI disk SA/media test
failed
SCSI disk unconditional format
test failed
SCSI drives, storage fault recovery
tracking 5-19
SCSI hard drives, test error codes
See also
hard drives
SCSI port
X
, Drive ID
Y
failed
– REPLACE (failure
message)
SCSI port
X
, Drive ID
Y
firmware needs
upgrading
SCSI port
X
, Drive ID
Y
has
exceeded the following
threshold(s)
SCSI port
X
, Drive ID
Y
is not
stamped for monitoring
SCSI port
X
, Drive ID
Y
may
have a loose
connection