Hardware Problems
2-4
HP Servers Troubleshooting Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: c-ch2 Hardware Problems.doc
Codename: Generic TSG Part Number: 161759-007 Last Saved On: 11/19/02 9:31 AM
Rack Stability
Before working with racks, be sure that you understand the following warning and
caution information, which may appear in your server-specific user documentation.
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling jacks.
•
The stabilizing feet are attached to the rack if it is a single-rack installation.
•
The racks are coupled together in multiple-rack installations.
•
Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
46-109 kg
100-240 lb
WARNING: To reduce the risk of personal injury or damage to the
equipment:
•
Observe local occupational health and safety requirements and
guidelines for manual material handling.
•
Obtain adequate assistance to lift and stabilize the chassis during
installation or removal.
•
The server is unstable when not fastened to the rails.
•
When mounting the server in a rack, remove the power supplies, the
media/power supply drawer, the processor/memory drawer, and all
System Power Modules to reduce the overall weight of the product.
WARNING: To reduce the risk of personal injury or damage to the equipment,
extend only one component at a time. The rack may become unstable if more
than one component is extended.
CAUTION:
To maintain optimum cooling, a perforated rack door must be used with
this server. Failure to use a properly ventilated door results in thermal damage to
your server.
