POST Error Messages
C-18
HP Servers Troubleshooting Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: j-appc POST Error Messages.doc
Codename: Generic TSG Part Number: 161759-007 Last Saved On: 11/19/02 9:43 AM
Table C-4: 200 Series POST Error Messages
continued
Error Code
Audible
Beeps
Probable Source of
Problem
Action
207-Invalid Memory
Configuration, Bank
X
None
A memory bank has been
incorrectly populated.
Check the location of the
bank specified. This bank
number will correspond to the
bank number shown on the
memory expansion board
identification label located on
the top air baffle of the
processor/memory drawer.
Check that a bank has been
populated with four DIMMs of
the same type, size, and
speed.
207- Memory
Installation Error
None
Memory module installed
incorrectly or
unsupported DIMM.
Check placement of memory
modules.
207-Memory
Configuration
Warning – DIMM in
DIMM Socket X does
not have Primary
Width of 4 and only
supports standard
ECC.
1 long, 1
short, or
none
Installed DIMMs have a
primary width of x8.
Install DIMMs that have a
primary width of x4.
208-Invalid Memory
Speed – Check DIMM
Installation
1 long, 1
short
The speed of the memory
is not compatible.
Check the speed of the
memory modules installed.
Then, check your server user
documentation and replace as
indicated.
209-Memory
Detection Failure.
Check Memory
Installation.
1 long, 1
short
Unable to size memory.
Check memory module
installation. Check for
additional resources at
www.hp.com.
209-Online Spare
Memory Configuration
- Bank A does not
match Bank C.
1 long, 1
short
DIMM group mismatch
between Bank A and
Bank C.
Check the size and speed of
the memory modules
installed. Then, check your
server user documentation
and replace as indicated.
continued
