HP StorageWorks 1000 - Modular Smart Array Скачать руководство пользователя

Страница: 265 / 307

ADU Error Messages

HP Servers Troubleshooting Guide

D-15

HP CONFIDENTIAL

Writer: Ted Weiman File Name: k-appd ADU Error Messages.doc

Codename: Generic TSG Part Number: 161759-007 Last Saved On: 11/19/02 9:53 AM

Table D-1: Array Diagnostic Utility (ADU) Error Messages

continued

Message Description

Recommended

Action

SCSI port

, Drive ID

has

exceeded the following
threshold(s)

The monitor and performance
threshold for this drive has
been violated.

Check and resolve the
threshold that has been
violated.

SCSI port

, Drive ID

is not

stamped for monitoring

The drive has not been
stamped with monitor and
performance features.

To change without destroying
the current configuration:

1. Run

ACU.

2. Change

the

array

accelerator size and save
the configuration.

3. Change

the

array

accelerator back to the
original size and save
again.

This should cause ACU to
stamp the drive with
monitoring and performance
features.

SCSI port

, Drive ID

may

have a loose connection

SOLUTION: Turn the system
off and attempt to reattach any
loose connections. If this does
not work, replace the cable(s)
and connection(s).

SMART is unable to
communicate with the drive,
because the cable is not
securely connected, or the
drive cage connection has
failed.

1. Power down the system.

2. Reconnect

the

cable

securely.

3. Restart the system.

4. If this does not solve the

problem, replace the
cables and connectors as
needed.

SCSI port

, Drive ID

RIS

copies within this drive do not
match

The copies of RIS on the drive
do not match.

Check for other errors. The
drive may need to be replaced.

continued

Содержание StorageWorks 1000 - Modular Smart Array




















































































































































































































































































































Результаты поиска

Содержание StorageWorks 1000 - Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 1000 - Modular Smart Array

Бренды по названию

Популярные бренды

HP StorageWorks 1000 - Modular Smart Array, Руководство по устранению неисправностей

Результаты поиска

Содержание StorageWorks 1000 - Modular Smart Array

Отзывы:

Похожие инструкции для StorageWorks 1000 - Modular Smart Array

Бренды по названию

Популярные бренды