HP 9000 Superdome, Руководство по установке

Страница: 252 / 260

Appendix H
JUST Exploration Tool
Data Files
228
Entity <GSP|NODE> <reference number>
.
.
.
End_Entity
The fields between the entity tags are described in the following section.
Entity Parameters Each Entity in this file must contain one and only one of the following entries.
If the entity is a Host—meaning that it has an Ethernet presence with its own IP address— then the entity requires a
hostname entry in the file. A hostname entry begins with the keyword
Hostname
and is followed by the hostname string,
the communication protocol (UDP or TCP), its IP address in dot notation, and the communications port number.
Hostname <host name> <TCP|UDP> <ip address> <port number>
If an entity is not a host, then a reference to the target host entity must be supplied. This reference specifies which host
entity commands targeted to this entity must be directed. This targeting entry begins with the keyword
Target_Entity
followed by the entity type (
GSP|NODE
) and its reference number:
Target_Entity<target entity type><target entity ref number>
Firmware information entries:
Firmware Information Entries Each entity must have a firmware information entry. This entry defines the
capabilities of the firmware to processes Scan Requests. A firmware entry begins with the keyword
Firmware
followed by
the supported sequence queue depth and queue size in kilobytes, and the version of the SDP protocol supported.
Firmware <queue depth> <queue size kBytes> <SDP version>
End of File
The complex configuration file must always end with the keyword End_Of_File .