GK600 User Manual
Chapter 3 Installation and Wiring
- 35 -
Wiring screws and bolts for main circuit terminals must be screwed tightly. Failure to
comply may result in faults and/or equipment damage.
ATTENTION
Signal wires should be away from main power lines to the best of possibility. In the
event that this cannot be ensured, vertical cross arrangement should be adopted,
reducing EMI interference to the signal wires as much as possible.
In case the motor cable exceeds 100m, an appropriate output reactor should be
mounted.
3.6.1 Main Circuit Terminals of GK600-2T0.4B ~ GK600-2T1.5B,
a
nd
GK600-4T0.75G/1.5LB ~ GK600-4T1.5G/2.2LB
Terminal marks
Designation and function of terminals
L1/L
、
L2
、
L3/N
Single / Three-phase AC input terminals (Connect L1/L,
L3/N when use single phase input)
/B1
、
B2
Braking resistor connection terminals
/B1
、
DC input terminals
U/T1
、
V/T2
、
W/T3
Three-phase AC output terminals
Ground terminal PE
+
+
-
