GK600 User Manual
Chapter 6 Specification of Parameters
-
173 -
C3-07
EAO gain
Range: -2.000~2.000
Factory default:
1.000
C3-08
EAO filtering time
Range: 0.0s~10.0s
Factory default:
0.0s
Adjustment method of EAO output curve is the same as AO1.
C3-09
DO maximum output pulse
frequency
Range: 0.1kHz~50.0kHz
Factory default:
50.0kHz
This parameter sets the maximum output frequency when Y2/DO terminal is selected as
high-speed pulse output.
C3-10
DO output center point
Range: 0~2
Factory default: 0
There are three different center point modes when Y2/DO terminal is selected as high-speed
pulse output.
0: No center point.
DO pulse frequency output range 0~ (C3-09) corresponds to "0~maximum", as shown in Fig.
6-36:
Fig. 6-36
1: Center point is (C3-09)/2, and the corresponding parameter value is positive when frequency
is higher than center point. The value that corresponds to DO pulse frequency at center point
is 0. DO pulse frequency C3-09 corresponds to the positive maximum value, while DO pulse
frequency 0Hz corresponds to the negative maximum value. See Fig. 6-37:
DO
对应表示量
表示量最大值
0
C3-09
DO
脉冲频率
DO corresponding value
Maximum corresponding value
DO pulse frequency
