GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 125 / 240

The actual rudder control is nonlinear since the rudder
deflection from the servo linkage becomes increas-
ingly smaller as the angle of rotation of the connecting
pulley or cantilever increases. When EXP values are
greater than 0%, this effect can be counteracted so
that the angle of rotation increases disproportionately
as the control stick deflection increases.
The EXP setting always acts directly on the corre-
sponding control function independent of whether
it affects the individual servo or several servos by
means of complex mixing and coupling functions.
The D/R and EXP functions can be switched together
by a single control if the control has been correspond-
ingly assigned. It is therefore possible to link the dual
rate and EXP functions which can be advantageous,
especially with fast models.
In the display graphic the green vertical line moves to-
gether with the related control stick to allow a clearer
evaluation of the curve characteristics related to the
control travel.
Between the displays of individual setting options, al-
ternatively touch the value field of the line "Ch" with a
finger or the provided stylus:
Touch
Phase depending Dual-Rate/Expo settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "
PHASE " menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
SYM button
After switching the option "
SYM
" added to the bot-
tom line from
OFF
to
ON
, a symmetrical, that is
joint, setting of both control sides is possible.
Touch
D/R function
Setting symmetrical Dual Rate values
If you want to switch between two or three versions,
assign a control in the line "Ctrl/sw" as described in
the section "
Control and switch assignment " ...
... a 2 or 3 way switch. If necessary also a control or
logical switch, e.g.:
Tap in the line labeled with "D/R" on one of both val-
ue fields to set in conjunction a dual rate value, for
example:
125 Function menu | general - DR/Expo