GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 148 / 240

In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "
Logical sw ".
Touch
Through this function two switches, controls and/or
logical switches or the favorite combination of them,
can be interconnected in an "AND" or "OR" switch.
A total amount of 8 logical switches "L1 … L8" can be
programmed:
The result of such a logical switch function, indicated
on the right in the display, can be used as alternative
switch function.
Logical switch
Programming the logical switch
Programming
The assignation of a required switch for a logical con-
nection is performed as usually in both value fields
of one line as described in the "
Control and switch
assignment " section. Tap on the left value field of the
logical switch to program, for example:
Touch
Weather the corresponding selection window ap-
pears:
Touch NO to terminate the procedure.
The assignation of a switch, control switch or logical
switch to both fields in one line follows as detailed de-
scribed in the "
Control and switch assignment " sec-
tion, for example:
"AND" / "OR"
The standard switch connection "AND", and vice ver-
sa, is set by tapping the related value field, for exam-
ple:
Touch
• "AND"
A logical switch is only then "closed", when both
switches are "closed".
• "OR"
A logical switch is already "closed" when one of
both assigned switches is closed.
The related actual switch position of the logical
switches is displayed in the right column:
148 Function menu | general - Logical switches