GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 124 / 240

D/R,EXP
Influence of the control attitude of the control functions 2, 3 and 4
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item
"
D/R,EXP ".
Touch
The dual rate/expo function allows you to switch or
influence the control deflections and characteristics
for the control functions of the control functions 2 … 4
through switch according to the phases. By otherwise
identical procedure the model specific differences
are related to the labeling of the respective value field
right near the yellow "CH":
If the actually active model memory is configured as
"car", "boat" or "copter", then the setting pages of
this sub-menu are identified as "CH2", "CH3" and
"CH4", for example:
If the actually active model memory is configured as
"helicopter", then the setting pages of this sub-menu
are identified as "ROLL", "NICK" and "TAIL" instead
of "CH2", "CH3" and "CH4", for example:
If the actually active model memory is configured as
"airplane" or "glider", then the setting pages of this
sub-menu are identified as "AILE" (aileron), "ELEV"
(elevator) and "RUDD" (rudder) instead of "CH2",
"CH3" and "CH4", for example:
Tip
An individual characteristic curve for control function 1
(Throttle/brake) can be set according to the model type
in the "
THR.CRV" or " C 1 curve " menu, by means of
which 7 separately programmable points can be set.
Dual Rate acts, as the control setting in the sub-
menu " CTL Set ", directly on the related Control func-
tion , independently from the fact that the function is
associated to a single servo or i actuated thorough a
complex mixer or coupling function by many different
servos.
The control deflections can be set for each switch
position between 0 and 125% of the normal control
travel.
EXP allows a more sensitive control of the model in
the central position of the respective control function
for values greater than 0% without having to do with-
out the complete deflection in the end position of the
control stick.
Conversely, the effect of the control around neutral
position increases for values less than 0% and de-
creases in the direction of the full deflection. The pro-
gression can be set from -100% to +100%; 0% cor-
responds to the normal linear control characteristic.
There is another use for the most common rotary ser-
vos:
124 Function menu | general - DR/Expo