GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 57 / 240

RES (delete model)
In the "Model Sel" sub-menu described here...
… you can reset an assigned model memory using
the
RES button at the right edge of the display.
Select then the desired model memory in the list of-
fered in the "Model Sel" display, as for example the
model memory 02, by tapping on it. The color of the
field switches from black to blue:
Tap on the RES button on the right side of the dis-
play:
Touch
Additional information and buttons appear at the bot-
tom right.
Touch NO to terminate the action and return to the
start page. After tapping on YES …
Touch
… after a short while the message "Please Wait!" ap-
pears …
... while the selected model is being initialized.
Once the process is completed, all the warning mes-
sages will disappear, and the display returns to the list
of models and the transmitter:
If you have initialized not a "different" but the actually
in use model memory, after the end of the initialization
two note windows will appear:
Tapping on OK opens directly the " TX ctl " menu,
where you can bing again your receiver. The note "Fail
Safe not set" should remind you that no fail safe has
been set yet.
Tapping on
NO terminates the process and brings
you back to the base menu.
Notice
This deletion cannot be restored. All of the data in
the selected model memory are completely de-
leted.
57 Base menu - Model selection