GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 93 / 240

Touch the RES button to reset a changed value in the
blue (and hence active) field to the default value.
Use the same procedure for the other settings.
Symmetrical delay
Tap on the SEL button on the right side of the display
to move to this display page:
To set a time delay of the selected control signal tap
on the button standardly labeled with
0.0s , for ex-
ample CH 8:
Touch
The button color changes from black to blue:
Touch the + button at the right edge of the display
to gradually increase the value to a maximum of 9.9
seconds:
Touch the – button underneath to reduce the value
to a minimum of 0.0 s, and touch the RES button to
reset the changed value back to the default.
To recall the graphic display of the servo travels of
the "
Servo " menu (servo monitor) and to activate the
" Servo test " function integrated in this display by tap-
ping on the SERVO button on the top right side of
the display or push the

buttons on the left of the
display, at the same time, while no value field is active .
Use the same procedure for the other settings.
Notice
Set a symmetrical delay for the transmitter-side
control signal with buttons with the standard la-
beling
0.0s . A delay which is set here affects the
servo that has the number of the delayed receiver con-
nection as well as all servos controlled by the control
element assigned to control function X.
93 Base menu - Control/switch setting