GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 62 / 240

In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "B":
Touch
The display switches to the "green" base menu. Touch
the menu item
"
E.P.A ".
Touch
E.P.A. Setting
In this display, the parameters are set that exclusively
relate to the servo, that is the servo path and angle of
rotation or its limit.
The set values always refer to the settings in the sub-
menu "
REV/SUB ".
E.P.A
E.P.A. Setting
Tip
In order to reach control channels with numbers higher
than CH5, touch
NEXT [ change page ] at the top right
of the display.
To change a current value, touch the desired button,
for example:
Touch
The button color changes from black to blue:
Repeatedly touch the
+
button at the right edge of
the display to gradually increase the current value,
and touch the
– button to lower the value in the active
value field. Touch the RES button to reset a changed
value back to the default value.
Use the same procedure for all the other settings.
To recall the graphic display of the servo travels of
the "
Servo " menu (servo monitor) and to activate
the " Servo test " function integrated in this display by
touching the TEST
I
field, tap on the SERVO button
on the top right side of the display or push the

buttons on the left of the display, at the same time,
while no value field is active :
Touch
Touch
Once you activate one or more control elements of
your transmitter, the resulting servo travel is graphi-
cally displayed, for example:
To go to the " BASE menu ", leave the "Servo display"
by touching the
BACK
button at the top left:
62 Base menu - Servo path/Servo limit