GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 170 / 240

THR.HOLD
AR throttle position
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "
THR.HOLD ":
Touch
AR throttle position
During competition, is expected that gas engines
should be completely turned off. In the training phase,
this is a bit inconvenient since you would have to re-
start the motor after each autorotation landing.
Therefore, set the value during the training phase in
this display so that the gas motor can be kept idling
during the autorotation phase without the clutch en-
gaging, and so that any electric drive is definitely off.
Tip
With the "Thr.CUT" option in the Base menu, there is an
alternative emergency off function.
• ACT line
To turn this option on and off, touch the value field
of the "ACT" line, for example:
• Ctrl/sw line
In this line, as described in the Control and switch
assignment section, assign the same switch with
which you switch to the autorotation phase, for ex-
ample:
• SET line
The green arrow to the left of the bar graph indi-
cates the current, influenced by the actual posi-
tion of the Throttle/pitch control stick ao as by the
throttle limit, position of the throttle servo. The red
arrow to the right indicates the currently set auto-
rotation throttle position, as standard -100%.
To change the current autorotation throttle posi-
tion, use the throttle/pitch control stick to move the
green arrow, and possibly the throttle trim, to the
position that the throttle servo is to assume during
autorotation, for example:
Touch the value field of this "SET" line:
Touch
The color of the field switches from black to blue:
170 Function menu | Helicopter model - THR AR