GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 50 / 240

Then press the desired control such as the
right proportional rotary control SL1:
• "MIXER" column
In the six value fields of the second column
with the header "MIXER", you can select in-
dividual helicopter mixers, or one of the two
available mixers in any combination.
To select a mixer, touch the button in the
"MIXER" column in the desired line with a
finger or the provided stylus, for example:
Touch
The button color changes from black to blue:
Tip
Remember that the percentages in the "IN"(put)
and "OUT"(put) line always refer to the momen-
tary position of the control stick and not to the
position of the point.
Rounding off the throttle curve
•
ON/OFF button in the "Curve" line
The default angled curve profile can be au-
tomatically rounded off by turning on the
rounding function by pressing this button,
for example:
Touch
Notice
The curves portrayed here are for demon-
stration purposes only and do not repre-
sent real pitch curves.
• TRIM button
The mz-24 HoTT Pro transmitters has a func-
tion that is integrated in the helicopter program
for trimming up to six support points of the
two options "throttle curve" and "pitch curve"
during flight though the transmitter software.
Open the following window by touching the
TRIM button at the top right edge of the dis-
play:
Basic operating steps
• "CTL" column
In the first column of the menu with the
heading "Control", select a control that ap-
pears suitable for this purpose from the con-
trols offered by your
mz-24 HoTT Pro trans-
mitter.
In order to assign a control, touch the but-
ton in the "CTL" column and the desired line
with a finger or a provided stylus, for exam-
ple:
Touch
The following appears in the display:
50 Base menu - Model selection