GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 138 / 240

• Offset X
A value unequal to "000%" entered in the "Offset
X" line causes the offset to shift
horizontally by a
maximum of ±100%.
To move the offset point 30% to the right (for ex-
ample), touch the value field to the right of "OFF-
SET X":
Touch
The color of the field switches from black to blue:
Use the + button to move the offset point, with-
in the actually set mixer end point, the aforemen-
tioned 30% to the right:
Touch the RES button to reset a changed value in
the blue (and hence active) field to the default val-
ue.
• Offset Y
A value unequal to "000%" entered in the "Offset
Y" line in contrast causes the characteristic of the
mixer to shift
vertically by a maximum of ±100%.
To move the previously mentioned as example off-
set point 30% to the right, always for example also
50% to the bottom, tap on the value field on the
right, near the "OFFSET Y":
Touch
The color of the field switches from black to blue:
Use the - button to move the offset the aforemen-
tioned 50% down:
Touch the RES button to reset a changed value in
the blue (and hence active) field to the default val-
ue.
Attention
The curve shown here is only for demonstra-
tion purposes and does not represent an ac-
tual mixer guide line.
Mixer switch
Once a mixer is activated, as described in the " Activat-
ing and deactivating mixers " section, the value fields
to the right of "ACT" and "Ctrl/sw" are also
ON
. This
activates the relevant mixer and turns it permanently
on in the current phase.
Independent of other factors, each mixer can, howev-
er, be turned on and off by assigning it its own switch.
On the right next to "Ctrl/sw", touch the value field ...
Touch
138 Function menu | general - Free mixer