GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 210 / 240

In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "S":
Touch
The display switches to the purple main menu. Touch
the menu item "
Warning ".
Touch
In this sub-menu, you can turn five triggers of a visu-
al and acoustical alarm on or off. Normally, only the
"CH1-POS", normally the throttle servo, is active-
ly monitored. Other switchable options are "Throttle
Hold", "Throttle Cut", "Phase" so as "Power OFF
time".
Notice
These settings are model memory specific and
for this reason they are settable individually for
each model memory.
Warning
Model memory specific warning settings
In order to switch back and forth between ON and
OFF
, touch the field for the other options, for exam-
ple:
Touch
Moreover in the "Throttle Cut" line it is also available
the option
REV :
While with ON the switch on warning with switched
on Throttle Cut is active, REV activates it exactly
reversed, with switched off Throttle Cut.
In the last line (Power OFF time), you can not only
switch this option
ON but also specify how long the
transmitter should wait following the last actuation of
a control element until triggering a visual and acoustic
warning before the transmitter turns off after an addi-
tional three minutes of inactivity.
The following selections are available: "OFF", "30 s"
so as 1, 5, 10, 20, 30 and 60 minutes. Repeatedly
touch the field of this line, such as:
Touch the BACK button at the top left to return to the
system menu:
210 System menu - Warning