GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 195 / 240

Notice
The available setting options depend on the
number of flaps selected in the basic settings of
the actual model.
After you have finished making your settings, touch
the
BACK button at the top left to return to the mixer
selection:
Touch
ELEV >> FLAP line
To support the elevator in tight curves and aerobatics,
the flap function can be included by controlling the
elevator with this mixer. Select the mixing direction
so that the flaps move downward when the elevator
is pulled ("up"), and conversely upward when the el-
evator is pushed ("down"), that is, in an opposite di-
rection.
A symmetrical or an asymmetrical effect can be de-
fined for each flap pair. Values of ±125% are possible.
By default, uniform values of +30% are set for the ai-
leron…
… and the flaps:
Adapt the individual values as described under "FLAP
line".
Notice
The available setting options depend on the
number of ailerons and flaps selected in the basic
settings of the actual model.
After you have finished making your settings, touch
the
BACK button at the top left to return to the mixer
selection:
Touch
FLAP >> ELEV line
When setting flaps, upward or downward torque can
arise about the transverse axis. It may also be de-
sirable for the model to pick up the pace somewhat
when slightly elevating the flaps. Both of these reac-
tions can be achieved with the mixer.
When setting the flaps, you can use this mixer to have
the position of the aileron automatically track the flaps
depending on the set value.
The setting can be symmetrical or asymmetrical to the
neutral point of the flap control.
The adjustment range is ±125%. With this mixer,
normal settings lie within the single-digit to low dou-
ble-digit range. By default, 0% is uniformly set:
Adapt the individual values as described at the begin-
ning of this section under "FLAP line".
After you have finished making your settings, touch
the
BACK button at the top left to return to the mixer
selection:
Touch
… and by tapping again on the BACK button you will
return to the menu selection:
195 Function menu | Airplane models - Flaps mixer