GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 76 / 240

Touch
Touch
2. Both "Timer 1" and "Timer 2" can be reset to the
original value in every moment by tapping on the
RES
button in the "Timer 1" and "Timer 2" dis-
plays.
Touch
3. Both "Timer 1" and "Timer 2" can be reset to the
original value in every moment by moving the de-
sired switch assigned, as following described, in
the line RESET SW in the "Timer 1" and "Timer 2"
displays.
A parallel to "Timer 1" data stream saved on the
SD memory card will not be influenced by the re-
set of the Timer 1.
"START SW" (start switch)
In this line you can assign to "Timer 1" or "Timer 2", as
detailed described in the section "
Control and switch
assignment ", a timer to start the selected timer.
"STOP SW" (stop switch)
In this line you can assign to "Timer 1", as detailed
described in the section "
Control and switch assign-
ment ", a timer to stop the selected timer.
"RESET SW"
(reset switch)
In this line you can assign to "Timer 1" or "Timer 2", as
detailed described in the section "
Control and switch
assignment ", a timer to reset the selected timer to the
original values.
Tip
A time period that has been changed is automatically
transferred to the "TIMER" line when this switch is acti-
vated. You can alternately touch the
RES button.
"LAP SW" (lap switch)
Ground requirement for the use of the laps counter is:
1. The programming of a forward or backward "Tim-
er 1" or "Timer 2".
2. The setting of switches in the value fields of the
options "START SW", "RESET SW" and "LAP
SW", for example:
In this example by pushing the SW6, assigned in
the value field "START SW", "Timer 2" will start
and, as soon as SW6 is pushed again, the timer
will be stopped.
By the first push for example of the intermit-
tent switch function of the 3-position switch SW2
through the pilot, e.g. when a marking happens,
"Timer 2" will be reset to the "0" value and at the
same time the chronometer for lap 1 will start.
Every other push on the intermittent switch will in-
crease the lap counter of one unit and will stop the
lap time (which will be saved) which has been run-
ning during this lap. At the same time, the intermit-
tent switch starts the timer for the next round, etc.
3. If the assignment of a switch in the value field "RE-
SET SW" is omitted, ...
... with each push of the intermittent switch SW2
will be saved since the start of the timer in each
elapsed time in the form of cumulative lap times.
76 Base menu - Timers