GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 67 / 240

Set a value with + or – on the right to the outside
which allows the motor or engine to run affordable at
the desired idle speed or which for example switches
definitely the engine or motor "off":
The adjustment range is
± 150%.
Notice
With a ICE engine, make sure that the throttle
servo does not mechanically over-travel.
Assign the required ON/OFF switches (such as S6) in
the "CTL Set" line as described in detail in the
Control
and switch assignment paragraph:
In conclusion, touch the value field in the "ACT" line to
release the option which is blocked by default (
BLK ).
Depending on the switch position, the display of this
field switches to
ON or OFF .
To recall the graphic display of the servo travels of
the "
Servo
" menu (servo monitor) and to activate
the " Servo test " function integrated in this display by
touching the SERVO field, tap on the SERVO but-
ton on the top right side of the display or push the 
buttons on the left of the display, at the same time,
while no value field is active.
Tip
After setting the value field in the "THR.Cut" line in the
"WARNING" sub-men of the system menu the transmit-
ter warns by switching on (
ON ) or off ( REV ) throttle cut
function.
To go to the "Home menu", leave the "THR.CUT" dis-
play by touching the
BACK button at the top left:
Touch
67 Base menu - Motor stop