GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 114 / 240

Touch the corresponding button ...
Touch
… to open the selected sub-menu. This visualizes the
quality of the connection between transmitter and re-
ceiver:
Top row: Level of channels 1 … 75 coming
from the receiver of the 2.4 GHz band
in dBm at the transmitter.
Bottom row: Level of channels 1 … 75 coming
from the transmitter of the 2.4 GHz
band in dBm at the receiver.
Tips
• The height of the bar is a measure of the reception
level expressed as logarithmic values with the unit
dBm (1 mW = 0 dBm).
• 0 dBm corresponds to the two baselines in the above
graph. Consequently, the level is poorer the higher
the bar and vice versa (see also "
S-dBm (reception
level) ").
In addition to the graphic display of the reception lev-
el, additional numeric information is provided to the
left. The abbreviations have the following meaning:
Display of RF status
Value Explanation
QU Quality expressed as a percentage of the
signal packages from the receiver arriving
at the transmitter
STR Quality expressed as a percentage of
the signal packages from the transmitter
arriving at the receiver
TD Level in dBm expressed as the percen-
tage of the receiver signal arriving at the
transmitter
ERR Shows the longest time in increments of
10 ms in which data packages were lost
when transmitting from the transmitter to
receiver
RD Level in dBm expressed as the percenta-
ge of the transmitter signal arriving at the
receiver
Vc Current operating voltage of the receiver
Vm "L.R-VOLT" shows the lowest operating
voltage of the receiver since the last time
the receiver was turned on
114 Function menu - Telemetry | Display of RF status