GRAUPNER mz-24 PRO, Руководство по программированию

Страница: 64 / 240

In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "B":
Touch
The display switches to the "green" base menu. Touch
the menu item
"
REV/SUB ".
Touch
REV/SUB
Setting of the servo direction and neutral position
Servo direction and neutral position
In both these displays in the left column can be set
the direction of each servo and in the right column the
related neutral position.
Notices
• First of all start by setting basically the direc-
tion in which the servos have to move before
you start setting other parameters!
• The numbers for the servos refer to the servos
connected to the corresponding receiver out-
puts providing that the transmitter and receiv-
er outputs have not been switched. A change
in the control mode therefore does not influ-
ence the numbering of the servos.
1. Setting the servo direction
With this option, the direction of servo rotation is
adapted to the specifics in the particular model so
that, when the control linkages and articulations
are installed, the servo's rotational direction does
not have to be considered.
The direction of travel is reversed by touch-
ing the corresponding value fields labeled
NOR
and REV , such as:
As soon as the travel direction of CH6 in a helicop-
ter model type or CH1 in the other model types is
going to be changed, a warning will be displayed:
Touch NO to terminate the procedure. Touch YES
to confirm the procedure which changes the direc-
tion of travel of the servo connected to CH1 or CH
6.
64 Base menu - Servo reverse/Servo center