GEO-SC
Variable Speed Control
Instructions
© 2007 Goodson Tools & Supplies
REV0710
GEO-SC
Please read instructions before using.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
1. Avoid working alone. If an accident happens, an assistant can bring help
2. Avoid electrical shock. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and cabinet enclosures
3. Keep work area clean. Cluttered areas invite injuries
4. Observe work area conditions. Do not operate in damp or wet locations.
Don’t expose to rain
5. Use eye and ear protection. Always wear ANSI approved impact safety
goggles.
6. Maintain tools with care. Inspect tool cords periodically and, if damaged
have them repaired by an authorized technician.
7. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
8. Use proper size and type extension cord. If an extension cord is required it
must be of the proper size and type to supply the correct current to the tool
without heating up. Other wise the extension cord could melt and catch fire,
or cause electrical damage to the tool. This tool requires use of an extension
cord of 0-15 amps capability (up to 50 feet), with wire size rated at 18
AWG. Longer extension cords require larger size wire. If you are using the
tool outdoors, use an extension cord rated for outdoor use. (signified by
“WA” on the jacket).
NOTE: Performance of this tool may vary depending on variations in localline
voltage. Extension cord usage may also affect tool performance
WARNING:
The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that may
occur. it must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the
operator.
