Specifications
Any questions please call Goodson Technical Service 1-800-533-8010
Any questions please call Goodson Technical Service 1-800-533-8010
Item
Description
Current
Capacity
15 amps
Voltage
Capacity
120AC
Fuse
15 Amp
Line Cord
6 feet, 3 Wire, double insulated, 16
AWG, U.L. Listed, Plug:3-Pole,
American (Grounded)
Features
Variable speed or full run
Dimensions
4-3/8 (L) x 2-9/16 (W) x 2- 3/4 (H)
inches
Weight
0.95 lbs
Operation
1. Before running, read and understand all instructions and safety warnings in
the instruction manual provided by the manufacture of the tool you are
using. Verify that the tool’s Trigger Switch is in the OFF position, plug the
electrical cord into the outlet on the Speed Control.
2. Insert the Speed Control Plug into an electrical outlet or extension cord
(See safety precaution #8 regarding extension cords on the next page).
3. For Variable Speed Control, set the Rocker Switch to VAR and turn the
Speed Knob to low, medium, or high speed.
4. For Full Speed Operation, set the Rocker Switch to FULL.
5. When ready press the Trigger Switch to the ON position to begin.
6. During Variable Speed Operation you can release the Trigger Switch and
turn the speed knob to another speed, then resume work.
7. When finishing release the Trigger Switch and press the Rocker Switch to
the (center) off position.
8. Unplug the speed control from the electrical outlet.
