manualshive.com logo in svg

GE Power Quality Meter Series, Инструкция по эксплуатации

Серия измерителей качества электропитания GE обеспечивает надежное и точное измерение параметров электропитания. Инструкция по эксплуатации доступна для скачивания бесплатно на manualshive.com. Подробное описание функций и возможностей прибора поможет вам правильно использовать его в вашей системе электроснабжения.

Поделиться
Скачать
background image

4-16

PQM Power Quality Meter

GE Power Management

4.2 S1 PQM SETUP

4 PROGRAMMING

4

•

Vb OVERVOLTAGE TRIG LEVEL: Once the phase B voltage equals or increases above this setpoint
value, the trace memory is triggered and data on all inputs are captured in the buffer. The number of cycles
captured depends on the value specified in the 

TRACE MEMORY USAGE

 setpoint. Phase to neutral levels are

used regardless of the VT wiring.

•

Vc OVERVOLTAGE TRIG LEVEL: Once the phase C voltage equals or increases above this setpoint
value, the trace memory is triggered and data on all inputs are captured in the buffer. The number of cycles
captured depends on the value specified in the 

TRACE MEMORY USAGE

 setpoint. Phase to neutral levels are

used regardless of the VT wiring.

•

Va UNDERVOLTAGE TRIG LEVEL: Once the phase A voltage is equal to or less than this setpoint value,
the trace memory is triggered and data on all inputs are captured in the buffer. The number of cycles cap-
tured depends on the value specified in the 

TRACE MEMORY USAGE

 setpoint.

•

Vb UNDERVOLTAGE TRIG LEVEL: Once the phase B voltage is equal to or less than this setpoint value,
the trace memory is triggered and data on all inputs are captured in the buffer. The number of cycles cap-
tured depends on the value specified in the 

TRACE MEMORY USAGE

 setpoint.

•

Vc UNDERVOLTAGE TRIG LEVEL: Once the phase C voltage is equal to or less than this setpoint value,
the trace memory is triggered and data on all inputs are captured in the buffer. The number of cycles cap-
tured depends on the value specified in the 

TRACE MEMORY USAGE

 setpoint.

•

SWITCH INPUT A TRIG: If the setpoint is set to 

OPEN-TO-CLOSED

, the trace memory is triggered and data

on all inputs are captured in the buffer on a switch A close transition. If the setpoint is set to 

CLOSED-TO-

OPEN

, the trace memory is triggered and data on all inputs are captured in the buffer on a switch A open

transition. The number of cycles captured depends on the value specified in the 

TRACE MEMORY USAGE

 set-

point.

•

SWITCH INPUT B TRIG: If the setpoint is set to 

OPEN-TO-CLOSED

, the trace memory will be triggered and

data on all inputs are captured in the buffer on a switch B close transition. If the setpoint is set to 

CLOSED-

TO-OPEN

, the trace memory is triggered and data on all inputs are captured in the buffer on a switch B open

transition. The number of cycles captured depends on the value specified in the 

TRACE MEMORY USAGE

 set-

point.

•

SWITCH INPUT C TRIG: If the setpoint is set to 

OPEN-TO-CLOSED

, the trace memory is triggered and data

on all inputs are captured in the buffer on a switch C close transition. If the setpoint is set to 

CLOSED-TO-

OPEN

, the trace memory is triggered and data on all inputs are captured in the buffer on a switch C open

transition. The number of cycles captured depends on the value specified in the 

TRACE MEMORY USAGE

 set-

point.

•

SWITCH INPUT D TRIG: If the setpoint is set to 

OPEN-TO-CLOSED

, the trace memory is triggered and data

on all inputs will be captured in the buffer on a switch D close transition. If the setpoint is set to 

CLOSED-TO-

OPEN

, the trace memory is triggered and data on all inputs are captured in the buffer on a switch D open

transition. The number of cycles captured depends on the value specified in the 

TRACE MEMORY USAGE

 set-

point.

•

TRACE MEMORY TRIGGER DELAY: In some applications it may be necessary to delay the trigger point
to observe the data before the fault occurred. The PQM allows the trigger to be delayed by the amount of
cycles set in this setpoint. Therefore, buffer will always contain the number cycles specified in this setpoint
before the trigger point and the remaining space in the buffer is filled with the cycles after the trigger point.

•

TRACE MEMORY TRIGGER RELAY: The relay selected here will be activated upon the occurrence of a
Trace Memory Trigger. This relay will be cleared once the Trace Memory is re-armed.

See the application note in Section A.1.4: TRIGGERED TRACE MEMORY RESOLUTION for additional
details.

Содержание Power Quality Meter Series



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power Quality Meter Series

Raycus RFL-A1000D Manual preview
RFL-A1000D
Бренд: Raycus Страницы: 40
RaycoWylie i4000 Calibration Instructions Manual preview
i4000
Бренд: RaycoWylie Страницы: 31
Yamaha Disklavier Mark III Series Advanced Operation Manual preview
Disklavier Mark III Series
Бренд: Yamaha Страницы: 39
Rae NeutronRAE II User Manual preview
NeutronRAE II
Бренд: Rae Страницы: 38
FlowLine LI21-1001 Manual preview
LI21-1001
Бренд: FlowLine Страницы: 2
Hanna Instruments HI 9147 Instruction Manual preview
HI 9147
Бренд: Hanna Instruments Страницы: 2
Zero 88 DMX DeBug Manual preview
DMX DeBug
Бренд: Zero 88 Страницы: 32
Vector 5200-00 User Manual preview
5200-00
Бренд: Vector Страницы: 8
THORLABS NR360S User Manual preview
NR360S
Бренд: THORLABS Страницы: 20
Fisso Photo Set Strato S-20 Instructions For Use preview
Photo Set Strato S-20
Бренд: Fisso Страницы: 2
SMPE MAFS010 Instructions preview
MAFS010
Бренд: SMPE Страницы: 2
aboni HydroTracer FLV HT2 Operation Manual preview
HydroTracer FLV HT2
Бренд: aboni Страницы: 48
Seneca S311D-XX-H Manual preview
S311D-XX-H
Бренд: Seneca Страницы: 2
SARAD Radon Scout Home Manual preview
Radon Scout Home
Бренд: SARAD Страницы: 2
Cewe DPM96 Series Operating Manual preview
DPM96 Series
Бренд: Cewe Страницы: 8
janitza 800-CT8-A Installation Instructions Manual preview
800-CT8-A
Бренд: janitza Страницы: 8
Young 03102L Instruction Manual preview
03102L
Бренд: Young Страницы: 7
Automation Direct ProSense LPM1 Series Operating Instructions Manual preview
ProSense LPM1 Series
Бренд: Automation Direct Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды