manualshive.com logo in svg

GE Power Quality Meter Series, Инструкция по эксплуатации

Серия измерителей качества электропитания GE обеспечивает надежное и точное измерение параметров электропитания. Инструкция по эксплуатации доступна для скачивания бесплатно на manualshive.com. Подробное описание функций и возможностей прибора поможет вам правильно использовать его в вашей системе электроснабжения.

Поделиться
Скачать
background image

GE Power Management

PQM Power Quality Meter

5-13

5 MONITORING

5.2 A1 METERING

5

3

Φ

 POS REAL ENERGY: This message displays the positive watthours (in kWh) since the 

TIME OF LAST RESET

date. Real power in the positive direction will add to this accumulated value, and real power in the negative
direction will add to the negative watthour value. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY VAL-

UES

 is used to clear this value. The displayed value rolls over to 0 once the value 4294967295 (FFFFFFFFh)

has been reached.

3

Φ

 NEG REAL ENERGY: This message displays the negative watthours (in kWh) since the 

TIME OF LAST

RESET

 date. Real power in the negative direction will add to this accumulated value, and real power in the pos-

itive direction will add to the positive watthour value. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY

VALUES

 is used to clear this value. The displayed value will roll over to 0 once the value 4294967295

(FFFFFFFFh) has been reached.

3

Φ

 POS REACT ENERGY: This message displays the positive varhours (in kvarh) since the 

TIME OF LAST

RESET

 date. Reactive power in the positive direction will add to this accumulated value, and reactive power in

the negative direction will add to the negative varhour value. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR

ENERGY VALUES

 is used to clear this value. The displayed value will roll over to 0 once the value 4294967295

(FFFFFFFFh) has been reached.

3

Φ

 NEG REACT ENERGY: This message displays the negative varhours (in kvarh) since the 

TIME OF LAST

RESET

 date. Reactive power in the negative direction will add to this accumulated value, and reactive power in

the positive direction will add to the positive varhour value. The 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY VAL-

UES

 setpoint clears this value. The displayed value will roll over to 0 once the value 4294967295 (FFFFFFFFh)

has been reached.

3

Φ

 APPARENT ENERGY: This message displays the accumulated VAhours (in kVAh) since the TIME OF

LAST RESET date. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY VALUES

 clears this value. The dis-

played value will roll over to 0 once the value 4294967295 (FFFFFFFFh) has been reached.

REAL ENERGY LAST 24h: This message displays the accumulated real energy (in kWh) over the last 24-
hour period. The 24-hour period used by the PQM is started when control power is applied. The PQM updates
this value every hour based on the previous 24-hour period. This information will be lost if control power to the
PQM is removed.

REAL ENERGY COST: This message displays the total cost for the real energy accumulated since the 

TIME OF

LAST RESET

 date. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY VALUES

 clears this value.

REAL ENERGY COST PER DAY: This message displays the average cost of real energy per day from time of
last reset to the present day. The cost per kWh is entered in the 

S1 PQM SETUP \ CALCULATION PARAMETERS \

ENERGY COST PER KWH

 setpoint.

TARIFF PERIOD 1/2/3 COST: These messages display the cost accrued for the three user-definable tariff peri-
ods. The start time and cost per MWh for these tariff periods are entered with the 

S1 PQM SETUP \ CALCULATION

PARAMETERS \ TARIFF PERIOD 1/2/3 START TIME

 and the 

S1 PQM SETUP \ CALCULATION PARAMETERS \ TARIFF PERIOD

1/2/3 COST PER MWH

 setpoints, respectively.

TARIFF PERIOD 1/2/3 NET ENERGY: These messages display the net energy for the three user-definable
tariff periods. The start time and cost per MWh for these tariff periods are entered with the 

S1 PQM SETUP \ CAL-

CULATION PARAMETERS \ TARIFF PERIOD 1/2/3 START TIME

 and the 

S1 PQM SETUP \ CALCULATION PARAMETERS \ TAR-

IFF PERIOD 1/2/3 COST PER MWH

 setpoints, respectively.

TIME OF LAST RESET: This message displays the time and date when the energy parameters were last
cleared. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR ENERGY VALUES

 clears the energy values. 

Содержание Power Quality Meter Series



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power Quality Meter Series

ABB LevelMaster 7100 Quick Start preview
LevelMaster 7100
Бренд: ABB Страницы: 2
ABB 4690 Series Upgrade Procedure preview
4690 Series
Бренд: ABB Страницы: 4
K&K Sound Bass Master Rockabilly Product Manual preview
Bass Master Rockabilly
Бренд: K&K Sound Страницы: 2
YOKOGAWA AQ2170 Operation Manual preview
AQ2170
Бренд: YOKOGAWA Страницы: 2
YOKOGAWA ADMAG TI Series Read Me First preview
ADMAG TI Series
Бренд: YOKOGAWA Страницы: 8
Keit IRmadillo DOC1048R User Manual preview
IRmadillo DOC1048R
Бренд: Keit Страницы: 27
Ecolab LMIT09/S209 Short Operating Instructions preview
LMIT09/S209
Бренд: Ecolab Страницы: 95
Jula 730-028 Operating Instructions Manual preview
730-028
Бренд: Jula Страницы: 9
Sequoia LISST-PORTABLE XR Manual preview
LISST-PORTABLE XR
Бренд: Sequoia Страницы: 41
ELGO Electronic EMIX2 series Operating Manual preview
EMIX2 series
Бренд: ELGO Electronic Страницы: 24
OPTICOM OPERA CONTROL CENTER SERVER - V 3.5 User Manual preview
OPERA CONTROL CENTER SERVER - V 3.5
Бренд: OPTICOM Страницы: 21
Autometers Systems A-400 Series Programming And Installation Brochure preview
A-400 Series
Бренд: Autometers Systems Страницы: 16
Fluke Biomedical ESA614 Getting Started Manual preview
ESA614
Бренд: Fluke Biomedical Страницы: 28
VOLTCRAFT 1461483 Operating Instructions Manual preview
1461483
Бренд: VOLTCRAFT Страницы: 108
Wetekom 79 71 59 Instruction Manual preview
79 71 59
Бренд: Wetekom Страницы: 22
TSI Instruments Aerotrak 9303 Quick Start Manual preview
Aerotrak 9303
Бренд: TSI Instruments Страницы: 4
Solartron Mobrey MRL800 Installation & Maintenance Manual preview
MRL800
Бренд: Solartron Mobrey Страницы: 34
Guru Home Systems GU-HB-201-R1 Installation Manual preview
GU-HB-201-R1
Бренд: Guru Home Systems Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды