GE Power Quality Meter Series, Инструкция по эксплуатации

Страница: 67 / 282

GE Power Management PQM Power Quality Meter 4-11
4 PROGRAMMING 4.2 S1 PQM SETUP
4
4.2.8 CLEAR DATA
Figure 4–8: SETPOINTS PAGE 1 – PQM SETUP / CLEAR DATA
• CLEAR ENERGY VALUES: Enter
YES
to clear all the energy used data under the actual values subgroup
A1 METERING \ ENERGY
. The
TIME OF LAST RESET
date under the same subgroup is updated to the current
date upon issuing this command.
• CLEAR MAX DEMAND VALUES: Enter
YES
to clear all the max power and current demand data under
the actual values subgroup
A1 METERING \ DEMAND
. The time and date associated with each message will
be updated to the current date upon issuing this command.
]] SETPOINTS
]] S1 PQM SETUP
CLEAR ENERGY
VALUES: NO
CLEAR MAX DEMAND
VALUES: NO
]] SETPOINTS
]] S2 SYSTEM SETUP
SETPOINT
] PREFERENCES
]
] CALCULATION
] PARAMETERS
CLEAR ALL DEMAND
VALUES: NO
CLEAR MIN/MAX
CURRENT VALUES: NO
CLEAR MIN/MAX
VOLTAGE VALUES: NO
] CLEAR DATA
]
Range: YES, NO
CLEAR MIN/MAX
POWER VALUES: NO
CLEAR MIN/MAX
FREQUENCY VALUES: NO
CLEAR MAX THD
VALUES: NO
CLEAR PULSE INPUT
VALUES: NO
CLEAR EVENT RECORD:
NO
LOAD FACTORY DEFAULT
SETPOINTS: NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
M E S S A G E
M E S S A G E
M E S S A G E