Fukuda Denshi DSL-8001, Руководство по эксплуатации

Страница: 70 / 252

2 － 20
Table Display
If the numeric data is displayed on the home display, the data every minute, at
NIBP measurement, and at alarm occurrence will be stored and displayed as
table data.
Display interval, condition, and order can be changed on the “Table Setup”
window.
Place the jog dial marker on the
(Table/Trend) icon and press the jog dial to
display the table window.
The waveform on the waveform 1 display area will always be displayed.
1
2
3
4
5
6
7
8
1 Table Data Printing Date Displays the printing date of the oldest data on
the table.
2 Display Selection Displays the current display condition.
When selected, the display switches in the order
shown below.
Standard/NIBP/Alarm/St NIBP/
St Alarm/ All
3 Display Interval Displays the current display interval.
When selected, the display interval switches in
the order shown below.
1 minute/2 minutes/5 minutes/10 minutes/15
minutes/30 minutes/60 minutes
4 Data at Alarm Occurrence The data at alarm occurrence will be displayed
with a red background color.
↑
: upper limit has been exceeded
↓ : lower limit has been exceeded
5 Previous Screen Displays previous table data.
6 Table Bar The position and proportion of the stored data
are displayed through the position and width of
the slider.
7 Next Screen Displays next table data.
8 Newest Screen Display Displays the newest table data.