Fukuda Denshi DSL-8001, Руководство по эксплуатации

Страница: 59 / 252

2 － 9
To Start and Stop the Monitoring
This section describes the setup necessary before monitoring and how to start
patient monitoring, to suspend monitoring, and to discharge a patient, after power
ON.
CAUTION
When lifting this equipment, hold it by the handle or the bottom part
of the main unit.
During transportation, firmly grasp the handle and make sure that
the equipment does not fall.
Preparation Before Monitoring
●
Discharge Operation at Power ON
This equipment stores the table/trend data for a certain period after the power is
turned OFF. To start monitoring a new patient, discharge process should be
performed.
The discharge process is the function that deletes the table and trend data,
initializes the setting, and deletes the data of the previous patient.
When the “Check Discharge at Power ON” on the Backup Setup is [ON],
“Discharge” confirmation screen will be displayed at power ON.
(The default is [ON].)
To start monitoring a new patient, select
[Discharge]. The data before turning ON
the power will be erased and monitoring will
start.
Selecting [Continue] will retain the data
before turning ON the power and
monitoring will start.
Reference
The “Check Discharge at Power ON” can be set on the “Maintenance”
menu. Refer to “8. Maintenance/Maintenance Menu/Backup Setup
”.
Reference
Discharge Automatically: The discharge process will be automatically
performed at power ON after the set duration for “Automatic
Discharge Time”. The “Discharge” confirmation window will
appear depending on the “Check Discharge at Power ON”
setting.
Discharge Manually: The discharge process will be manually performed.
The “Discharge” confirmation window will be always displayed.
For details, refer to “8 Maintenance/Maintenance Menu”.