Fukuda Denshi DSL-8001, Руководство по эксплуатации

Страница: 108 / 252

3 － 18
CAUTION
 When [1] is selected, the 1-minute interval measurement will
start from the time the selection is made. The measurement
will automatically stop after 12 minutes (maximum of 15
minutes when re-measured), and 2.5-minutes interval
measurement will be set.
 Selecting [Cont.] will start the continuous measurement. The
measurement will automatically stop after 12 minutes
(maximum of 15 minutes when re-measured), and
2.5-minutes interval measurement will be set.
 Select [OFF] if not performing the auto mode measurement.
NOTE
 If [1] minute is selected, 1-minute interval measurement
cannot be stopped by pressing the (NIBP Start/Stop)
key. To stop the 1-minute interval measurement, select [OFF]
or other time interval on "Measurement Interval Setup"
window.
 If monitoring is suspended when the measurement interval
setting is [Cont.] or [1] minute, the setting will change to [2.5]
minutes after the monitoring is resumed.