Installation
17
Post mounting
Proceed as follows to mount the transmitter to a post:
a0003954
Fig. 13:
Post mounting
A
Vertical mounting
B
Horizontal mounting
1.
Screw the four securing screws (item 1) into the threaded openings on the transmitter.
2.
Counter every securing screw with a nut (item 2).
3.
Set the transmitter to the desired position on the post or pipe.
4.
Push the securing plates (item 4) onto the securing screws in accordance with Fig. 13.
5.
Screw a nut (item 3) onto each securing screw and tighten it so that the transmitter is securely
fastened to the post or pipe.
You can also secure the field device to a square universal post in conjunction with the weather
protection cover. These are available as accessories, see the "Accessories" section.
a0003957
Fig. 14:
Mounting the field device with a universal post and weather protection cover
Proceed as follows to mount the weather protection cover:
1.
Screw the weather protection cover onto the upright post (bores 2) with 2 screws (bores 1).
2.
Secure the field device to the weather protection cover. To do so, use the bores (3).
Ø7
0
1
4
2
3
1
4
2
3
A
B
Содержание Topcal S CPC310
Страница 161: ...Appendix 161 ...
Страница 175: ......
Страница 176: ...www endress com worldwide BA409C 07 en 11 06 Printed in Germany FM SGML 6 0 DT 71028144 ...
