Endress+Hauser Topcal S CPC310, Руководство по эксплуатации

Страница: 113 / 176

Commissioning
113
DAT download (only available if the DAT module is connected)
DAT process Options
• DAT write
• DAT read
• Erase DAT Select the desired DAT process
DAT write: You save the configuration and the
logbooks of your transmitter to the DAT
memory module.
A security message is issued stating that all the
data on the DAT will be overwritten. After
confirming, the process of backing up to the
DAT memory module is started.
DAT read: You copy the configuration that is
saved on the DAT memory module to the
EEPROM in the transmitter.
A security message is issued stating that all the
data in the transmitter will be overwritten.
After confirming, the process of copying from
the DAT memory module is started.
Erase DAT: You delete all the data on the DAT
memory module.
A security message is issued stating that all the
data on the DAT will be erased. The data are
erased after confirming.
Set up 2
Select Set up 2 Options
• Reset
• ISFET (only with ISFET
sensors)
• SCS reading
Display sensor data.
ISFET: Displays the current ISFET sensor data
• Reference [mV]
• Leak current [
μ A]
SCS reading: Displays the current values of the
sensor check system SCS
• Impedance of glass electrode [M
Ω
]
• Impedance of reference electrode [k
Ω
]
Instrument version
Controller • SW version
1.20-xx
• HW version
1.00
• Serial No.:
12345678
• Card ID
M3Cxxx
You can call up the controller data here.
The software version refers to the current
device overall software.
Motherboard • SW version
- - - -
• HW version
1.00
• Serial No.:
12345678
• Card ID
M3G-xx
• Non-Ex
You can call up the motherboard data here.
Connector PCB • SW version
- - - -
• HW version
1.04
• Serial No.:
12345678
• Card ID
M3K-xx
You can call up the connector PCB data here.
Function Options Info